Food Photography Made Easy: The Lunch Box

Shooting vittles can be as complex as you want to make it. But it is pretty easy to get elegant, well-lit food photographs with almost no money out of pocket.

Hit the jump for a gastronomic update on a Strobist cheapskate classic.
__________


Of the 1,000+ posts on Strobist at this writing, one of the most popular is the $10 Macro Studio -- a cardboard box hack that makes it almost impossible to take a bad shot of a small object.

With a little alteration, that same concept can be used to create classic food photography lighting with a light source as simple as a desk lamp. Of course, a speedlight will work great, too...


Thinking Outside of the Box

The classic direction for lighting food is from the top/back. In typical presentation, food has more width and depth than it does height. So the top/back is a logical position from which light can rake across the food to reveal texture and form.


For this walk-through I raided the fridge for some fresh tomatoes. Not complex, but nice and 3-d for illustrative purposes. Here they are with a bare light hitting them from the classic, top/back position.

This hard light almost makes the 'maters look as if they are made of wood and painted glossy red. You can do a lot to manipulate the visual perception of surface quality with different lighting techniques.


Here is the same shot with a wider lens. The light source is a bare SB-800, but it could just as easily be a desk lamp.

You could easily soften that light with an umbrella if you have one. But if your food or setting is specular, those ribs (Mmm-hmm-hmm-hmm... ribs...) are gonna give you problems.

This is one of those instances where a soft box is much better than a shoot-through. But there is no need to shell out for one if you are not shooting this kind of stuff all of the time.

Instead, you can hack a large cardboard box (quite literally) and essentially turn the soft box inside out.


So, here is the basic box -- use a big one -- cut up and placed back together to give you a sense of where the cuts are. The more of an angle you put on that diagonal cut, the more your light will come from the back. I did this one kinda middle-of-the-road, but you might want to crank it up a notch or two.

And if you use a razor knife like I did, please be careful. Or at least bookmark this page before you start. Just sayin'.


(LIGHTING GEEK NOTE: I had fun doing a quickie shot of the cut-up cardboard box. Click it to see bigger, with notes on the locations of the four flashes involved ...)


That big open square on the top is gonna get some diffusion material, so the window will do its job and improve your harsh light source. Tracing paper is ideal, but tissue paper (big, like from a gift) works great. Stretch it smooth. Wax paper will do in a pinch, too.

I scrounged a little Rosco Tuff Frost, which is tough (duh) and uniform, not to mention color-neutral. That last part is important, if you are using some type of mystery diffusor.

Also, if you are using this with a desk lamp, use an incandescent bulb (no CFLs) and set your camera's white balance to tungsten. Everything will work fine.


Here is the part you keep, and by now it should be getting pretty self explanatory as to how to use it to soften that bare flash or desk lamp. If you are more of a food blogger than a photographer, you can do this all with continuous light and a tripod -- just crank that aperture wayyy down for lots of depth of field.

(Not that this is a foodie blog, but you regulars would be surprised at who passes through here while learning to shoot stuff for their site.)


Okay, so lets stick our box in between the light and the subject and see what happens. Right away, the tomatoes look way better. I am using a sheet of black plexi as a background, to get a clean reflection of the new, slicker light source. (The umbrella would suck for this background, because of the ribs' reflection.)


Here is a pullback, which actually is a pretty cool composition. But looking at this (and the photo just above) our next problem is that the bottoms of the tomatoes are too dark. This is because all of the light is coming from the back/top.

That's an easy fix, and we do not need another light, either. We can get double-duty out of our nice main light by adding a reflector:


Since this is a no-wallet Monday, let's fix this with a folded sheet of printer paper (or, if you are over 50, typing paper...) Just fold it and stand it in front of the tomatoes -- maybe to one side, as shown. (You could stick it right in front, too for a different look.)


As you can now see, that one sheet of paper makes a huge difference.

By default, it will not overpower the main light source, either. It's a reflector, and cannot give out more light than it is receiving.


So, let's try another reflector on the other side. It may be that the second reflected light source ends up being too much. But at two cents a pop, go for it and see what happens.

Here it is close-up, which is the same photo at the top of the post. Maybe you like the extra detail, or maybe the second highlight turns you off. That's up to you -- add salt to taste.


Here is a pullback with two reflectors for clarity's sake. Depending on the topography of what you are shooting, these reflectors do not need to be big, or symmetrical -- or even white. You can illuminate those shadows exactly the way you want by placing as many reflectors -- large and/or small -- wherever you want.

Need more light? Try aluminum foil reflectors. That's what I used for this cake. Crinkle it up, then straighten it back out for a nice, smooth, pebbled reflector surface. You can choose the shiny or matte surface, too, for different looks.


Here it is, from the side angle.

Again, that SB-800 flash could easily be a desk or floor lamp. And the grey backdrop was just to hide the white wall reflection in the initial shot. Once you get the diffusor panel up, that problem solves itself.
__________


Fast Food

So, there you go -- an easy entré into food photography. If this kind of thing floats your boat, you might want to consider a medium-sized soft box, which will of course make this kind of light very easy. And it travels well, too.

If you're a food blogger and you decide to play with it, link in and spread the luv -- and post a comment so we can see what a hotshot food photographer you are now...

Tick, Tick, Tick

Just a quick reminder that the first Boot Camp II assignment is due at end of day (local time) tomorrow, June 23rd.

Lotsa entries pouring in from the procrastinators, and you can check out some of the people blogging along with it here.

-30-

On Assignment: HCAC Dancer

I am working on several projects this summer, the most enjoyable of which being a series of portraits for the Howard County Arts Council.

I photographed Kassi, a dancer, for this series and got a chance to play with one of the two-light techniques we talked about earlier. This was also the first chance I got to use a new boom setup that is a little heavier duty than the one featured earlier this week.

More, inside.
__________


Riaz Redux

I normally like to play around with new lighting styles before trying them out on an assignment. In this case, I used the small-flash lighting class in Dubai earlier this year as the guinea pig for this shoot. You might recognize the top photo as being lit similarly to that of Riaz, the first example in the two-light portrait series.

There are a couple of differences, but the grid key / umbrella fill was a common denominator for both. In shooting Riaz, I had the umbrella squished right up under the lens. With Kassi, I put the umbrella on the floor with a flash mounted to it but with no stand.

I used an umbrella swivel adapter to attach an SB-800, and stuck the assembly on the ground. The umbrella rests at about the correct angle for uplighting a low-to-the-ground subject by itself.

Ratios were done without a meter and without regard to any absolute settings, as usual. I positioned the fill light first and altered my flash power and/or aperture until I saw a nice baseline exposure for the frame.

Generally, I like to get it to a full exposure, and then drop my power level on the flash or close down the aperture until I get a nice looking floor to the fill light. The idea is to use the fill as a sort of safety net, to lift the shadows that will be formed by the key light, lest they get too dark and contrasty. If you are coming from off axis with the fill, you'll also introduce a second angle to the overall light.

I really liked the look of the low-in fill, as it gave its own shape to the subject -- much more so that would an on-axis fill. But as much as I liked the shape of the fill, I was going back and forth on the shadow that it threw over Kassi's head and shoulders.

In the end, I wanted the direction of the light, but not the shadow. So I toned the latter way down in post. There is definitely a procedural learning curve for me, even two full years after leaving the tightly controlled Photoshop environment of The Sun.

I have to remember to loosen up, as my default is typically to "do it the newspaper way." But then I remember if I were personally doing everything the newspaper way today, I would be drowning in debt and arbitrarily lopping off perfectly good body parts in a misguided attempt to get a "good return on investment."


Oh well. Back to the light.

The key, as you can see, is a gridded SB-800. We have already locked in the fill level and shooting aperture, so the key level is set by altering the flash's power level. (We can also move the flash closer or further away, but that would change the look of the light.)

Unlike the grid on Riaz, I wanted to catch Kassi's face and body with the key but mostly miss the wall on the leading edge. This way I could control the tone in the white wall, even though she was leaning against it. To do that, I didn't aim the grid at her face, but rather out in front of her face a little bit. So her face is nearer to the edge of the beam than in the center of it.

A grid on a speedlight is a very small light source and thus produces very hard shadows at this distance. But I know they won't fall too far off of the table because I built my fill light first. The combination is soft vs. hard, high vs. low and tight light vs. everywhere light brings a lot of different contrast layers into play. If I wanted, I could have used a 1/2 CTB on the fill and a 1/2 CTO on the key to add a neat color contrast in there, too.


A Bigger Boom

For another look, we wanted to do Kassi dancing. She is very athletic, and incorporates that into her routines. So we set up to light a photo of her leaping.

I knew she would be looking back over her shoulder at me, and wanted to light her face from a flattering angle. To do that, you have to find the position of her face and then get the light wherever it need to be to hit that angle.

In Kassi's case, to three-quarter light her, we'd have to be above, behind and camera-right of her face when she looked over her shoulder. So we were going to need to get the key up pretty high -- especially considering we'd be going through an umbrella, too.

For that I used a bigger, heavier-duty boom than the Interfit model we talked about earlier this week. I used a Paul Buff counter-weighted boom arm attachment on a 13-foot light stand. I got this to be able to get my bigger flash heads up high. And while it is not super heavy duty, it is sufficient for that kind of work.

You buy it in two pieces -- the stand and the boom arm. The stand is a heavy-duty, 13-foot stand, which is also a great thing to have kicking around when you need it. The boom assembly includes a two-section extension pole, a multi-angle clamp and comes with an 11-pound, slide-able counterweight. They total up to $160.

Needless to say, this is rock solid for a speedlight, and I also have been happy with it in a supporting role for both my SB's and my WL's.


So, here's the setup. The key light is above/behind/camera right, through an umbrella. There is a back/separation light (an SB-800) hiding way back at camera right on a compact, 5-section stand.

The key light location was trial and error, done as Kassi worked through a few practice leaps. In the end, it was a perfectly logical location, given the position of her face. Kassi's leap put her about two feet in front of, and to camera left, of the umbrella.

The fill was a bigger problem, as we could not just open the shutter to let if build up the ambient. By balancing that way, we would have lost the shutter needed to freeze the leap. So it would all have to come from flash.

It had to be soft, come from close to on-axis and reach back to light the back wall, too. So I needed a physically big light source, coming from the camera's direction and pretty far back. Fortunately, our room was a neutral, light color, so the wall 15 feet or so behind me became my modifier.


I fired a WL 600 into that wall, building a nice, soft, directionless fill that would be far enough back to reach back to the background wall without losing too much oomph. My shooting position was about three feet in front of the light.

If you are in a neutral room, always consider your walls as possible huge bounce surfaces that you can employ as everything from a soft key to a humongous soft ring-like fill. But you'll need some power if you are going to use it over a large area.

This is one of many examples of a way in which you can use a monobloc with smaller flashes. Ironically, the SB is my key and the WL 600 is the fill. This doesn't make a lot of sense, unless you consider how much more efficient a close-in, umbrella'd light is than another light bounced way back off of a wall and having to carry another 30-40 feet after that.

Having a big light in your back allows you wallpaper fill light over a large area while accenting with speedlights.
__________


Read More: On Assignment

Q 'n A

Meredith, of Jackson, Mississippi asks:

I'm in the process of setting up a studio in a new space. We were trying to pick paint colors, and the rest of the building has a black ceiling.

The photo studio, I think, should obviously have white walls instead of some crazy color. But then we were questioning the ceiling color -- should it be white, or black? (It is a very small room.)


Which would you do? If it sounds arbitrary, give it a little thought before making the jump.
__________


Meredith, if you think about it, you probably answered your own question when you brought up the room size. The classic color for a studio ceiling is black, since that controls unwanted reflections better than any other color.

You can always put a light up there if you want top light. But you certainly won't want it all of the time, and that is what you'll get to a large degree when working in a "very small room."

Small rooms are the most difficult for controlling stray light bounce, so the smaller your studio is, the darker you will probably want to paint the surfaces. If you can't escape light walls, you want to create some "negative fill" reflectors out of a flat black surface of some kinds.

Bonus points: Paint your reflectors white on one side and black on the other, and you'll have it both ways. But the main point is that you want to be able to control the bounced light.

And dark surfaces -- including the ceiling -- will help you do that.

For Over-the-Top Lighting Without an Over-the-Top Budget


Pictured above is Joe McNally's assistant Drew Gurian acting as a voice-activated boom during a recent desert shoot (detailed here).

While this boom is perfectly serviceable, one cannot always find a Drew hanging around in the desert when top light is needed. For the Drewless, an excellent and inexpensive speedlight boom solution, inside.
__________


The third cool thing I came across in Paso Robles (here is one and two) was a very slick little boom/stand photographer Sean Rolsen brought along.

It is designed as a flex-reflector holder (it even comes with the clamps) but it does double duty as a sweet little speedlight boom.

It is the Interfit Combi-Boom Stand, and the little joint where the stand turns into a boom is where the magic happens. The boom arm actually collapses into the main tubes of the stand itself -- you can even continue the boom arm straight up for extra height if you want.

But if you pull it all the way out, it rotates. Then you slide it back into its little swivel clamp and you have a speedlight boom. It does not come with a counterweight, so this thing collapses nice and thin. But the opposite end of the boom has a hole where you can hook an improvised weight up to do the trick. A camera bag or something should fit the bill nicely.

The combination pic below shows a detail of the boom joint, and how it operates. Looking at Sean's, it seemed just about perfect for lightweight speedlight use. But I would not consider it heavy duty by a long shot -- and I wouldn't put a lot of unnecessary torque on the clamp, either.

(If you have it set up right, with your scrounged counterweight end extended enough to balance your flash reasonably well, there would be no reason to over torque it anyway.)


There is no way you are gonna hang an AlienBee on this thing. A speedlight is about as far as it is gonna go. And it is gangly enough to not want to stick an umbrella up there in any wind at all. But for top light using speedlights in a nice, small package, it is hard to beat -- and an umbrella would be fine indoors.

The elbow mechanism is pure genius, and the folks at Interfit are to be congratulated for that. (Those are the same guys who just debuted the "Strobies".) Also of interest is the price -- under $100.00. For lightweight, occasional boom use (and a stand when you do not need the boom) it appears to be a great solution.
__________


:: Interfit Combi-Boom Stand ::


(Photo at top courtesy Bobbi Lane)

Dustin Diaz's Daily Dose

A number of people have pointed me to Dustin Diaz's 365 Project. And while this is certainly not the first of its kind to come down the pike, Dustin has inserted a couple of twists that make his project right up our alley.

Get your One-A-Day shot, inside.

__________


Light and Steady

First of all, Dustin is using much of his photo marathon to explore what he can do with flash. And while that sounds all laudable and romantic and stuff, I can tell you from experience that there is nothing like a long-term project to expose your "camera expertise" as nothing more than a bag of tricks -- and a shallow bag of tricks at that.

At least that's been my experience when doing long-term projects. Which is exactly why you do them, of course -- to grow, practice, discover your limits and then expand them out of sheer necessity.

But Dustin has added another Strobist-friendly aspect to his daily grind: Lighting diagrams for many of his photos. That's right, not only is he shooting a lit photo a day, but he is also spelling out his techniques for anyone following along.


If Only I Had that Kind of Time...

So, what kind of loser has enough free time on his hands to light, shoot, diagram and publish to the web non-stop? (aside from the obvious, of course.)

Well, if you are a Gmail user, you have Dustin to partially thank for it. Dustin was an engineer on that team at Google. As for myself, I am not sure how that Gmail tech stuff works. But you can get a basic idea with this video.

Dustin worked at Yahoo before that, and recently moved over to Twitter. In fact, he announced his resignation from Google with a tweet. The guy's got flair, I'll give him that much.

But suffice to say, he is a plenty busy guy to be tackling a significant project like this. And if you are interested in trying a 365 yourself, I got a chance to shoot some Q's at him about his year-long journey thus far. So I'll just shut up and let him do the talking.

(As always, click on any of the pix to get to the Flickr page, which in turn will point you to his lighting diagrams.)
__________


Dustin Diaz on the 365

Q: Talk a little about the framework for the project. Has this been harder than you expected, or has your lighting grown easier and more intuitive because of the repetitive nature of it?

Doing a "365 project" is of course, not uncommon among photographers. To give some brief history, I had already been taking pictures several months prior to even beginning the project. In regards to daily shooting, I have been a photographer for four years.

You know the old saying -- "you need a camera to take pictures". So I carried mine everywhere. However, moving into the 365, the point was not to see if I can push the shutter every 24 hours (that's easy) but rather to invoke the challenge of being a creative editor. Choosing just one image from a bunch is hard -- really hard. And then starting that process all over again the next day, well, that's just exhausting.

I have, however, found it easier over time in deciding what photo I want to take each day by simply focusing on single-themed photos. This is as opposed to going out and taking a variety of photos and then having to decide between having "too many" photos at the end of the night.

In regards to being "harder than I expected," it has been. But that's only because expectations continually change, and the level of expected quality grows and having an audience that gives constant feedback is terrifying! But once you have an audience, you can't stop. Or at least, I can't.

As far as "lighting" goes (since this is the Strobist blog, after all) it's a double-edged sword. It's easy to fall into the trap of taking the same photo using the same light settings, but in different locations. But part of the goal of the 365 is to try new things, make mistakes, and do things out of the ordinary.

For example I never thought I'd be running in the middle of traffic, leaving a tripoded camera in a windy suicide lane, clamping lights to people's garages, or paying homeless teenagers to trigger the shutter. But to quote a friend, it's like "taking crack, responsibly." Being a daily strobist is hard, yet addicting, but one must be responsible enough to put the gear down for a day, and then let your next idea wait another day.


Q: Speaking of that, has the project revealed the limitations of your bag of lighting tricks? Are hitting a wall, or are you growing as a result of those exposed boundaries?

Yes, there are limitations, but first, a quote from Michael Freeman from his book The Photographer's Eye:
"The important decisions in photography are those concerned with the image itself: the reasons for taking it, and the way it looks. The Technology, of course, is vital, but the best it can do is to help realize ideas and perception"

Thus, in one sense, to say one is only as good as their equipment is a bad outlook. I am, however, at a point in my photography career where I've set myself up to mostly "not worry" about gear. Between my wife Erin and I, we have six speedlights and six PocketWizards. Needless to say, I don't feel hard done by when it comes to lack of light. The only real limitation is my imagination (for lack of a cheesier expression). And no amount of gear is going to solve the problem of making a good photograph with meaning. So yes, this is difficult.

From an Engineers perspective, one would think there's only so many combinations of lighting setups before you're doing the same tricks over. And nobody wants to be a one-trick pony — at least I don't.

But to this point, there are only three things that have gotten easier:

1) leaving the house
2) setting up
3) tearing down


Therefore, the biggest stumbling block each day is the "what" and "where"-- and the occasional "how much time do I have before midnight," which has happened on several accounts.


Q: You famously swapped horses from Google to Twitter. At Google, there is a decent-sized community of photographers, and even a pretty tight group of guys into small-flash lighting. Is there a similar cadré at Twitter? If not, have you seen any interest from others due to your project?

Google is an Engineering company. They have a photography mailing list. Most of the subjects that popped into the list were related to pixel density, f/stops and lenses with an infrequent link to someone's personal photos requesting a critique.

None of these are bad things, as they represent the culture quite well. And as far as I remember, very few were into strobist photography. I had helped organically grow one small group within the Gmail team, and it became quite fun for a lot of us.

On the flipside of the coin, I am more interested in the art of photography. For example, learning the inverse square law was fun for a few days. But in the end, it's only a mean to an end. Taking photographs that actually evoke emotion is what I am after, and light plays a major factor into creating that feeling.

Nevertheless and to the point, Twitter is a much smaller company (in regards to employees). And there is no photography community. If anything, there is a strong coffee cadré, which I will happily embrace. The goal was to lead the Frontend Engineering team, not seek camera friends.


Q: What advice would you have to anyone considering a 365 project? I.e., in retrospect, would you deliberately choose a broad or narrow visual framework, and why?


For anyone crazy enough to do anything out of the ordinary for 365 days, you WILL get tired. But specifically for photographers, find inspiration in other places besides photo websites.

Watch an episode of LOST or Heroes, then perhaps go buy a comic book. (Hey, I'm not even into comics, but there is some good strobist inspiration in those things). Or better yet, just leave the house knowing you can't come back without taking at least ONE good photo that you're happy with.

And lastly, reflect often. Notice your own improvement and try to out-do yourself — not others. It does not take a 365 to do this. I mainly chose my custom 365 framework to bring forth challenges that were appropriate to what I wanted to get out of it. Therefore broad or narrow, whichever framework someone chooses, I believe self-challenges are always a great way to better oneself.
__________


Oh, and Speaking of Twitter

Back at Strobist International HQ, we know we have been extremely neglectful of late in the Twitter department. It started off on it last summer, with more enthusiasm than long-term strategy. Then the upstream conversation quickly got to take up far too much time in the workday. It was kinda like trying to take a sip out of a fire hose.

Right now, it is still dormant. But I am finally off of my travel merry-go-round and trying to work out a system that will be sustainable. If you want to be onboard for whatever ends up happening, you can click to follow here.

The only thing I can promise is that, for a little while at least, it'll basically be the sound of crickets chirping (tweeting?) in the distance. But when I decide how to light it up again, you'll be the first to know.
__________


Links:

:: Dustin's 365 Site ::
:: Dustin's Lighting Diagrams ::
:: Follow Dustin from the Heart of the Twitterverse ::

[OT] PSA: Careful With Those iPhones, People

I will be the first to admit that the iPhone is a great little device for photographers to carry around -- web, phone, portfolio, camera, etc. But they can bring with them a completely new set of dangers. You can be tempted to be shooting pictures when you probably should be concentrating on other things.

Regular readers of Chase Jarvis' blog already know this, but he was recently involved in a minor traffic incident while filming a promo for this Friday's talk at the Art Director's Club of Denver. It was even caught on tape:



As if that is not warning enough to be aware of your surroundings, now McNally is having attention-deficit-related problems, too:
__________



A word to the wise is sufficient: Let's be careful out there, people.

I you are in Denver, head over to the ADCD this Friday. And if you are anywhere else, check out Joe's completely redesigned new website.

Just make sure you look both ways before crossing the street.
__________

LINKS:

:: Chase Jarvis Blog ::
:: Joe's New Digs ::
:: Art Director's Club of Denver ::